CHANGLONGXING SCIENCE & TECHNOLOGY (SHENZHEN) CO.,LTD
Model No.: CL-80/120/80H
Thickness Of Film: 0.01-0.05mm
Thickness Adjustment Scope: 10µm-50µm
Equality Percent Of Thickness: ≤±5%
Width Of Effective Film: 2000mm(max) Or 4*500mm
Structure Of Film Layers: A/B/C Or A/C/B/C/A Co-extruded
RAW MATERIAL: LLDPE,LDPE,MLDPE
Extrusion Capacity(max): 460kg/h
Linear Speed Max: 350m/min
Installation Dimension(L*W*H): 14*6.5*4.5m
Packaging: pearl wool with film package & wooden motherboard.
Brand: CHANGLONG MACHINE
Place of Origin: ShenZhen,China
Supply Ability: 20-50 sets/year
HS Code: 8477209000
Breif Picture of CL-80/120/80H 2.0M Advanced Stretch Film Machinery
Breif Parameter of CL-80/120/80H 2.0M Advanced Stretch Film Machinery
1.Structure of Film Layers of CL-80/120/80H Advanced Plastic Stretch Film Machinery:A/B/C or A/C/B/C/A Co-extruded;
2.The Fit Material of CL-80/120/80H Advanced Stretch Film Machinery:LLDPE,LDPE, MLLDPE;
3.Extrusion Capacity(max) of CL-80/120/80H Advanced Plastic Stretch Film Machinery:460kg/h;
4.Thickness Adjustment Scope of CL-80/120/80H Advanced Stretch Film Machinery:10µm-50µm;
5.Equality Percent of Thickness of CL-80/120/80H Advanced Plastic Stretch Film Machinery:≤±5%;
6.Width of Effective Film of CL-80/120/80H Advanced Plastic Wrapping Film Machinery:2000mm(max) or 4*500mm;
7.Line Speed Max of CL-80/120/80H Advanced Plastic Wrapping Film Machinery: 350m/min
9.Weight of CL-80/120/80H Advanced Stretch Film Machinery: 25T
10.T-die Brand of Advanced Plastic Wrapping Film Machine:ChangLong Machinery
FASTEN AND STABLE SUPPLY FLOW OF RAW MATERIAL
Eliminate the extruder`s pulsation wave.
Improve the product quality.
Decrease the defective rate and waste, which can save 2% raw material and 25% of the unit power consumption.
ENSURE STABLE AND EFFICIENTPRESSURE CONTROL
The melt pump can provide a stable pressure, which short the discharge time obviously and make the production effectively.
INCREASE THE EXTRUDER OUTPUT AND THE MACHINE LIFE
It has been found that after installing the melt pump,the inner pressure of the extruder decreases a lot while the melt shear strength decrease.
Also the melt pump can avoid the damage to the extruder from the high pressure.